Our review sample Thesis OB1 had SRAM Force 22 shifters with a Rival 1 long cage rear derailleur that shifts across a wide-range SunRace 11-46 11-speed cassette.

DURBAN Blacksmith, situated in the heart of Jacobs, proudly hosted 17 Grade 12 learners from Inanda Newtown Comprehensive High School recently, together with Audrey Kaunda, the Mechanical Technology educator of the school, over a two day period.

Released in 2012 and more recently updated in an updated V2 edition, the Bad Cat Unleash is a simple but effective reamper with the functions described above (achieved via a solid-state Class D power amp capable of a 100 watt output), along with two footswitchable output levels and an effects loop. A bigger, heavier, and a little more expensive option—but one that has been extremely popular in recent years—the Fryette Power Station couples a quality reactive load with a 60-watt tube power amp, along with an effects loop and other useful functions such as a line in and DI out.

And then we exclude as well the investments in new technology. And the new technology is the concept, Scalable Brake System, and today it consists of the 2 product lines — 2 products, Fast Acting Brake Valve and EMB, that may in the future include also other products.

Longer fork blades accommodate ’cross tire clearance with 700c wheels and mud clearance. This did not present a problem when I put a 700c wheel with a 40mm tire into the OB1 fork.

Thanks Ray, always love your reviews, and always go through your site to get on Amazon to try to support what you do!

There’s really no way around this because so much indoor air can leak into the ceiling around them. Be sure to use IC-rated recessed fixtures fitted with LED bulbs. Besides using much less electricity, LED bulbs run cooler than incandescent. You’ll also need to use fibreglass shingles to withstand the heat of an unventilated roof.

So far, all that seems to be happening is talk of the first, which will vanish as the election gets closer. This government doesn’t have the balls to take unpopular decisions.

The Bosch 4100 really is a great tool, and it set the platform under which the new Reaxx saw was developed. Both tools still have onboard storage for the guard system and rip fence as well as blade wrenches and even additional blades. It’s the premium flesh detecting technology of the Reaxx system, however, that takes the $599 price point of the 4100-09 and jumps it to $1499. With that in mind, it’s only fair to compare the new Bosch Reaxx vs SawStop JSS-MCA Jobsite table saw and see which might be best for your business.

The Touring R series II is a fusion of styling and technology where old meets new, a high performance sports car with unique exterior design, that is available with the option of 2wd or 4wd and manual or tiptronic transmission, whilst perfectly weighted power steering and powerful brakes with ABS are standard. These are combined with a choice of powerful 3.6 or 3.8 litre engines to ensure that however you specify your Touring R, each journey will be an occasion to remember.

Coolest detail: Tiny seatstays. One of English’s signature details are pencil-thin seatstays, which he uses for more than just visual impact. English is a mechanical engineer, and that knowledge is put to use crafting his bikes. A rear triangle’s lateral stiffness is handled by the chainstays, triangulated by the rear hub. The seatstays only see compressive forces and, “a steel tube has immense strength when loaded in compression,” he says. “So I can use small-diameter, thin-wall tubing for the lowest weight.” English is clear that the small stays are not a way to improve vertical compliance: “A triangle is by definition a rigid structure, and there is not enough loading in the seatstays to cause the steel tubing to bend in a way that would provide any measurable deflection at the dropouts.” Instead, English uses sloping top tubes and lots of exposed seatpost. “The unsupported length can flex and passively absorb some vibrations,” he says.

On the other hand, tool storage on the SawStop JSS-MCA is simply brilliant. Adding to the convenient side storage is a tray that sits just under the table. It’s accessible when you extend the table to its full rip capacity. Inside, you can safely stores items like a replacement brake cartridge, the three included hex wrenches, and the miter guide. On the back you find a place for an extra blade and the two blade wrenches. They’re held securely, but can be released quickly and easily.