Good quality Press Brake Machine - 1250E DOUBLE E-TYPE MAGNET BODY Powered 1250mm x 2.0mm Electromagnetic Sheet Metal Folding Machine – JINDONGCHENG
Good quality Press Brake Machine - 1250E DOUBLE E-TYPE MAGNET BODY Powered 1250mm x 2.0mm Electromagnetic Sheet Metal Folding Machine – JINDONGCHENG Detail:
JDC BEND™ 1250E DOUBLE E-TYPE MAGNET BODY Powered 1250mm x 2.0mm Electromagnetic Sheet Metal Folding Machine
Product image is only a representation, actual product appearance may differ slightly
JDC 1250E DOUBLE E-TYPE MAGNET BODY Powered High performance electromagnetic sheet metal folder Specifications
Nominal capacity | 1250 mm x 2.0 mm (4ft x 15g) |
48” (4-foot) length with a maximum capacity of 15 gauge mild steel. | |
Clamping force (with standard full-length clampbar) | 12Tons is consistent across the entire beam, allowing for crisp bends even in the middle of the brake. |
Recommended for | HVAC shops,Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics,and more. |
Eletrical Supply: | 1Phase & Pneumatic air supply, 220/240 V ac and will work at virtually any site. |
Nominal current: | 15Amp |
Duty cycle: | 30% |
Box Depth | Unlimited |
Bend Angle | 0-180° |
Max. Clamping Bar Lift | Unlimited |
Max. Capacity with Extension | 16ga stainless steel |
Max. Capacity without Extension | 15ga stainless steel |
Thermal Cut-Out | 158°F (70°C) |
Shipping dimensions | 1.41m x 0.95m x 1.1m = 1.6m3 |
GW/NW | 300/280kg |
Blade gap adjustment | Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses. |
adjustable back gauges | Comes with product supports and adjustable back gauges for production runs. |
Scaled stroke angle control | lets you deliver repeatable bends time after time. |
Notes | Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On. |
Easy operation | 1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the the bottom bending leaf to complete the bend and repositioned ready for another bend. |
open-ended design | 1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake. 2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth, since it isn’t reliant on conventional finger depths. |
Standard accessories | include a storage tray, adjustable backstops, A full-length clamp-bar,and a complete set of short-length clamp-bars. |
Optional accessories | available for these models include a narrow clampbar, a slotted clampbar for forming shallow boxes more quickly |
Special tooling | Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clampbars can be replaced by specialised tooling |
Operator Safety | Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs. |
JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)
MATERIAL (yield/ult. stress) | THICKNESS | LIP WIDTH (minimum) | BEND RADIUS (typical) |
Mild Steel (250/320 MPa) |
2.0mm | 30 mm* | 3.5 mm |
1.6 mm | 15 mm | 2.2 mm | |
1.4mm | 10 mm | 1.5 mm | |
Aluminium Grade 5005 H34 (140.160 MPa) |
2.2 mm | 30 mm* | 1.8 mm |
1.7 mm | 15 mm | 1.2 mm | |
1.5 mm | 10 mm | 1.0 mm | |
Stainless Steel Grades 304, 316 (210/600 MPa) |
1.4 mm | 30 mm* | 3.5 mm |
1.1 mm | 15 mm | 3.0 mm | |
0.9mm | 10 mm | 1.8 mm |
Product detail pictures:


Related Product Guide:
Technical FAQ: Thru-axles and frame stiffness | Clamping Box Brake
2019 Mercedes-AMG E53 Cabriolet Review: Lion’s Heart, Sheep’s Clothing | Brake Sheet Metal
We are going to dedicate ourselves to providing our esteemed buyers together with the most enthusiastically thoughtful products and services for Good quality Press Brake Machine - 1250E DOUBLE E-TYPE MAGNET BODY Powered 1250mm x 2.0mm Electromagnetic Sheet Metal Folding Machine – JINDONGCHENG , The product will supply to all over the world, such as: Paris , Saudi Arabia , Hanover , As an experienced group we also accept customized order and make it same as your picture or sample specifying specification and customer design packing. The main goal of our company is to build up a satisfactory memory to all customers, and establish a long term win-win business relationship. Choose us, we always wait for your appearance!

This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!

Write your message here and send it to us